Department Publications

This paper presents an analytical framework to investigate the performance of full duplex (FD) device-to-device (D2D) networks where devices in a cluster are capable of caching popular content. Assuming spatially randomly distributed D2D users in the cluster where the users request for content according to the Zipf distribution, analytical expressions are derived for the device communication probability, coverage probability, cluster average spectral efficiency, and content average download latency of the system. The system performance metrics are derived for the three device operating modes of FD only mode, half duplex (HD) only mode, and mixed FD/HD mode. Numerical results show that the mixed FD/HD mode is the most appropriate communication mode for cache enabled FD D2D networks to achieve the highest cluster average spectral efficiency and low content average download latency.

This paper proposes and analyzes a distance-based duplex mode switching scheme for maximizing the average throughput of a cellular network and its underlay device-to-device (D2D) network. For each duplex mode of the cellular network, a node distance based duplex mode selection scheme is proposed to maximize the throughput of the D2D network. The proposed duplex mode selection scheme provides average throughput improvements in the range of 10%-200% for the D2D network compared to the always half-duplex and always full-duplex communications for high D2D user scatter variances.

This paper proposes a novel channel estimation method and a cluster-based opportunistic scheduling policy, for a wireless energy transfer (WET) system consisting of multiple low-complex energy receivers (ERs) with limited processing capabilities. Firstly, in the training stage, the energy transmitter (ET) obtains a set of Received Signal Strength Indicator (RSSI) feedback values from all ERs, and these values are used to estimate the channels between the ET and all ERs. Next, based on the channel estimates, the ERs are grouped into clusters, and the cluster that has its members closest to its centroid in phase is selected for dedicated WET. The beamformer that maximizes the minimum harvested energy among all ERs in the selected cluster is found by solving a convex optimization problem. All ERs have the same chance of being selected regardless of their distances from the ET, and hence, this scheduling …

Due to high costs at initiation, alternative communication strategies to dedicated short range communication (DSRC) have been looked at to facilitate quick deployment of intelligent transportation services. Wi-Fi Direct (WD), has come across as a candidate, and this paper focuses on the drawback of large transmission delays in WD. To this end, it studies the performance gains of using a broadcast mechanism on the downlink between the group owner (GO) and the clients of a WD group, instead of the currently used peer-to-peer method. Gains in terms of average total delay and the average energy consumption of the GO are presented using a theoretical analysis as well as a simulation study using OMNeT++. It is also shown that the degradation in performance on the downlink due to not having retransmissions is within tolerable limits given that the size of the group is selected properly.

This paper focuses on wireless energy transfer (WET) to a pair of low complex energy receivers (ER), by only utilizing received signal strength indicator (RSSI) values that are fed back from the ERs to the energy transmitter (ET). Selecting the beamformer that maximizes the total average energy transfer between the ET and the ERs, while satisfying a minimum harvested energy criterion at each ER, is studied. This is a non-convex constrained optimization problem which is difficult to solve analytically. Also, any analytical solution to the problem should only consists of parameters that the ET knows, or the ET can estimate, as utilizing only RSSI feedback values for channel estimation prohibits estimating some channel parameters. Thus, the paper focuses on obtaining a suboptimal solution analytically. It is proven that if the channels between the ET and the ERs satisfy a certain sufficient condition, this solution is in fact …

We present a simulation study of a cooperate car following application implemented by the Wireless Access for Vehicular Environ-ments (WAVE) protocol stack, which uses the MAC and Physical lay-ers defined by the IEEE 802.11 p protocol. This is a simple Intelligent