Department Publications

We present a MUSIC-based Direction of Arrival (DOA) estimation strategy using small antenna arrays, via employing deep learning for reconstructing the signals of a virtual large antenna array. Not only does the proposed strategy deliver significantly better performance than simply plugging the incoming signals into MUSIC, but surprisingly, the performance is also better than directly using an actual large antenna array with MUSIC for high angle ranges and low test SNR values. We further analyze the best choice for the training SNR as a function of the test SNR, and observe dramatic changes in the behavior of this function for different angle ranges.

The acquisition of channel state information is an essential step in enabling intelligent reflecting surfaces (IRSs) for wireless communications. In this letter, we introduce a novel procedure to estimate the cascaded channel between the base station (BS), IRS, and users in a multi-user multiple-input single-output system. The common BS-IRS channel, over which all users transmit, is leveraged to decompose the cascaded channel into a series of rank-1 matrices. Low-rank matrix recovery methods are utilized to improve upon the linear minimum mean-squared error estimate of the cascaded channel. A theoretical upper bound for the mean-square error (MSE) of the proposed estimator is derived. Numerical results reveal that the proposed techniques outperform the existing counterparts in terms of the MSE and scale with the number of BS antennas.

Self-localization based on passive RFID-based has many potential applications. One of the main challenges it faces is the suppression of the reflected signals from unwanted objects (i.e., clutter). Typically, the clutter echoes are much stronger than the backscattered signals of the passive tag landmarks used in such scenarios. Therefore, successful tag detection can be very challenging. We consider two types of tags, namely low-Q and high-Q tags. The high-Q tag features a sparse frequency response, whereas the low-Q tag presents a broad frequency response. Further, the clutter usually showcases a short-lived response. In this work, we propose an iterative algorithm based on a low-rank plus sparse recovery approach (RPCA) to mitigate clutter and retrieve the landmark response. In addition to that, we compare the proposed approach with the well-known time-gating technique. It turns out that RPCA outperforms significantly time-gating for low-Q tags, achieving clutter suppression and tag identification when clutter encroaches on the time-gating window span, whereas it also increases the backscattered power at resonance by approximately 12 dB at 80 cm for high-Q tags. Altogether, RPCA seems a promising approach to improve the identification of passive indoor self-localization tag landmarks.

Defect detection plays an important role in product quality assurance in many industrial applications. Air-coupled ultrasound defect detection setups have the advantage that they are non-destructive and do not contaminate the investigated materials. However, this approach comes with some challenges due to the weak signaling response of the defects. Thus, sophisticated signal separation methods are required. To address this challenge, low-rank-plus-sparse recovery (LRPSR) is proposed and compared with state-of-the-art machine learning (ML) methods. The results obtained show that the LRPSR method achieves comparable results in terms of detection rate to those achieved by ML. Yet, for a small training data set, the LRPSR approach outperforms the ML algorithms. The small training data set is important for detecting defects of different production lines without having a time-consuming training process. In …